Perfect for securing multiple small tents, a large tent or a large structure in normal to hard ground.

GroundGrabba Pro's are made for general ground use from semi soft to hard grounds. Not For Use In Sand

12 x GroundGrabba Pro
12 x HexHook Pro
2 x 3/4" Hex Socket Driver
1 x 3/4" x12" Masonry Drill Bit
1 x GroundGrabba Carry-All Bag

GroundGrabba Pro:

Made of heat-treated carbon steel
Galvanised for anti-corrosion
Weight .5 pound
Length 1′
Shaft thickness .39″
Flights (spirals) 1/4″ wide, .07″ thick
3/4″ hex head with collar

Weight: .5lbs
Dimensions: 12 × 1 × 1 in

HexHook:

Made of mild steel
Zinc-plated, anti-corrosion protection
.14 pounds total weight
4″ total length
1.6″ total width
.19″ plate thickness
.31″ hook thickness
.7″ hook inner diameter
.31″ hook opening
1″ key hole opening
3/4″ hex key
300lb Rated
Lifetime Warranty

Socket Driver:

Weight: 0.81lbs
Dimensions: 2 × 2 × 6.5 in

Drill Bit:

1/2” x 12″
1/2″ Masonry Drill Bit to pre-drill holes into very hard ground to help make the insertion of GroundGrabba Pro possible.
Made of hardened steel with a tungsten tip.

Weight: 0.129lbs
Dimensions: 30 × 10 × 10 in

Carry All Bag I:

600D Heavy Duty Polyester
18" × 8" × 10" total dimensions
15" x 6" side pocket dimensions
Black
Designed to carry the GroundGrabba Pro

GroundGrabba Pro is the heavy duty screw in ground anchor stake. For most ground varieties.

HexHook Pro Lag Bolt Hook Plate Adaptor is a hook plate for securing ropes and tensioners to GroundGrabba Pro or Pro II or Lag Bolts. Designed to fit either the GroundGrabba Pro or Pro II, our HexHook Pro and adapt to ropes or tensioning devices.

The 3/4” Hex Driver is a convenient socket with shank designed to fit the entire range of GroundGrabba Series tent peg-stakes.

Use the Masonry drill bit to create pilot holes into hard earth to help the deployment of your GroundGrabba.

Made of 600D Heavy-Duty Polyester, the GroundGrabba Carry-All Bag I is the perfect portable container for your GroundGrabba Pro and GroundGrabba Lite system.

With the GroundGrabba Pro, it doesn’t matter if you need reliable metal stakes to ground your camping tent or shade structure in the desert or are putting up signs around your business. Perhaps setting up vendor tent gazebos for a party or event, tying down patio furniture, or setting up your pop up carport, outdoor swing set or light aircraft.

There is a primal need to keep your stuff protected and secure. With our galvanised heat treated carbon steel metal ground anchor stakes, you can feel confident that whatever you are anchoring will remain intact and safe, regardless of weather conditions. This is YOUR stuff and nothings going to mess with it.

Please Note: These are not toys. You will need a powerful drill if attempting to use these in hard ground.

Our HexHook Pro Lag Bolt Hook is your perfect solution for adapting to your lag bolts or of course GroundGrabbas for easy rope attachment. As you know there’s been no solution like this available until now. The HexHook Pro Lag Bolt Hook has more uses than just a lag bolt hook like cracking open your cold beer or even using the built-in hex tool to wind your lag bolts or GroundGrabbas in and out of the ground.

Your wishlist

My wishlist

Add to wishlist

Share List Via Email

Share Via

Subscribe and get alerts about your Wishlist

Are you sure you want to delete this wishlist?

Are you sure you want to delete selected wishlist products?

Out of stock products will be not move. Are you want to move selected wishlist products?

Wishlist management page

You have been unsubscribed

You will no longer receive emails about wishlist activities from this store.

Share your wishlist

Share this item

Share Via