- Size: 5 x 3 x 3.5 in. (ea.)
- Weight: 28 oz. / 1.75 lbs. (set)
- Intended shock length: OEM or equivalent
- Lift Height: 0 u2013 2 in.
- Deflection (compression): 0.75 in. @ 1500LBS.
Aftermarket 3.5 in. Rubber Rear Bump Stops for 5th Gen Toyota 4Runner (2010-2022)
DuroBumps are proudly made in the USA with dual durometer (hardness) rubber, providing smooth, progressive dampening that greatly reduces hard bottom-outs and allows for greater control and comfort compared to OEM bump stops, which can feel rock-hard on contact. With DuroBumps, youu2019ll gain better off-road control and comfort compared to OEM bump stops and eliminate the u201cshell-shocku201d effect experienced when hitting larger bumps.
The DuroBumps DBR35 is designed to be slightly taller than OEM bump stops so it can compress under load to soften the impact just prior to the ultimate stop. The DBR35 will not limit your wheel-up travel compared to OEM bump stops. Itu2019s intended for stock-height trucks and mild lifts up to 2 in. (fully loaded).
Features and Benefits
- Improved handling u2013 Dual durometer rubber allows DuroBumps to act as a secondary coil spring, with smooth engagement that progressively increases compression load in a predictable fashion.
- Mounts in OEM location u2013 Easily bolts into the OEM location to ensure a proper fitu2014no modifications needed.
- Corrected misalignment u2013 The OEM bump stops on the rear of Toyota trucks are not aligned properly to the rear axle. They are actually misaligned by about 1 in. DuroBumps addresses this issue by incorporating the proper offset into our design so that DuroBumps contacts the rear axle tube centered as needed.
- Increased suspension life u2013 DuroBumps greatly extends the life of other suspension components by absorbing the shock load when the suspension bottoms out. DuroBumps absorb the impact, saving your critical suspension components from excessive wear and service intervals to the shocks, upper and lower control arm bushings, and panhard bar bushings.
- Small, compact, application-specific u2013 Designed to fit specific truck models. No u201cuniversal fitu201d spacers are required.
- Smooth and silent u2013 Unlike Hydro bumps, DuroBumps are whisper quiet on contact.
- Premium bump stops u2013 DuroBumps are proudly made in the USA from the highest quality raw materials.
- Provided mounting hardware u2013 JIS 10.9 zinc-coated hex head metric bolts and single-use thread locker are provided with every set of DuroBumps, ensuring a strong, secure fit.
Note: For off-road use only. By installing these aftermarket bump stops, the user assumes all risk and liability. DuroBumps are not designed for towing applications. Seller will not be held liable for any damages or loss associated with the installation or use of this product for any reason.