Stock: 9995
- Kills Glare & Reflections - matte finish keeps the Grenadier’s big screen readable even in direct sun.
- Hides Fingerprints & Smudges - no more greasy prints after every touch.
- Genuine XPEL Stealth Material - premium self-healing matte film, not cheap PET.
- Cut to Fit the 12.3" Screen - made for the 2024+ INEOS Grenadier touchscreen.
- Scratch & Impact Protection - shields the display from daily wear and flying debris.
- Everything Included - protector, application fluid, microfiber cloth & felt-tip squeegee.
- Made in the USA by StickerFab
Matte Screen Protector Kit
Cut the glare, ditch the fingerprints, and protect your 2024+ INEOS Grenadier’s display.
Actually Usable in DaylightThe Grenadier is built to be driven outdoors, and that means sun hitting the dash from every angle. Glare and reflections can turn the screen into a mirror right when you need your map, camera, or vehicle info. Our matte finish diffuses that light so the display stays readable, and it cuts the fingerprint smear that shows up on bare glossy glass. |
 |
 |
Easier to Read, Easier to Keep CleanMaps, the instrument cluster, and your vehicle info stay readable while the matte finish knocks down reflections, and touch response feels the same as the bare screen. Fewer fingerprints to wipe off, and a cleaner look in the sun. |
Genuine XPEL Stealth Material
We don’t cut corners on material. This kit uses genuine XPEL Stealth - a premium matte, self-healing film built for automotive use. It looks factory, feels smooth to the touch, and holds up to daily use far better than the cheap PET protectors you’ll find elsewhere.
Watch the Install
Before You Install: Get the Temperature Right
For the best results, install with your vehicle at a comfortable 70–74°F. Run the A/C to cool the cabin, or the heat to warm it slightly. That temperature keeps the slip fluid from drying out too quickly or too slowly, so you have time to position the film and squeegee it out cleanly.
Turn the screen off if your vehicle allows it. A screen that has been on for a while is warm to the touch, and that heat speeds up slip fluid evaporation.
Grenadier note: the Grenadier doesn’t let you turn the screen off, so temperature control matters even more. Let the cabin settle into the 70–74°F range before you start.
Install tip: be a little liberal with the application fluid so the film doesn’t grab the screen instantly. Any small bubbles will disappear on their own over the next day or two.
What’s in the Kit
- Matte screen protector cut for the 12.3" Grenadier screen
- Mini StickerFab Application Fluid
- Microfiber cloth
- Felt-tip squeegee
This Fits
| Make | Model | Year | Screen |
|---|---|---|---|
| INEOS | Grenadier | 2024+ | 12.3" |
Frequently Asked Questions
|
Will it make the screen blurry? Straight-on, text and graphics stay readable and you gain daylight visibility. Depending on viewing angle you may notice slight haziness at the outer edges from light diffusion, because the film sits a few millimeters in front of the actual display. It’s less visible the further back you sit. |
Is it hard to install? Not at all. It’s a wet install with the included fluid and squeegee - just follow the video and install with the vehicle at 70–74°F. Be generous with the spray and let small bubbles settle out over a day or two. |
|
What material is it? Genuine XPEL Stealth - a premium, self-healing matte automotive film, not a cheap PET protector. |
Does it affect touchscreen response? No - the film is thin and touch-friendly, so your screen responds exactly as it did before. |
|
Can I return it? Yes. StickerFab-made items come with 30-day returns, and the kit is made in the USA. |
Why do I need to keep the cabin at 70–74°F? Slip fluid dries too fast on a hot screen and too slowly on a cold one. The target range gives you time to position the film without it grabbing early. |