Get your Toyota Sequoia ready for adventure with this Slimsport Roof Rack Kit / Lightbar Ready. The wind fairing has a 40” cutout for mounting a lightbar and turning night into day. This sleek yet super strong rack is perfect for carrying sports gear or other cargo for your next getaway.
- This low-profile flat deck Slimsport rack has a load-carrying area of 2666mm (105") x 1383mm (54.4").
- The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
- The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
- Effortlessly access your Slimsport cargo with the Handle/Light Slimsport Rack Bracket.
- Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately).
- Included in the Toyota Sequoia (2023-Current) Slimsport is a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately), and allows full operation of the moon roof.
- Fitment guide and all mounting hardware included.
- 6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
- The middle and rear mounting feet utilize the factory fixing points. Front mounting feet do not require drilling when installed with the included No Drill kit, but hardware is included for the drill & bolt option (recommended).
- Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
- All Front Runner Racks are backed by a Limited Lifetime Warranty*
KSTS003T - Toyota Sequoia(2023-Cur) Slimsport Roof Rack Kit Lightbar Ready
Consisting of:
1x KSTS001 - Toyota Sequoia (2023 - Current) Slimsport Tray
1x RRAC286 - Toyota Sequoia(23-cur)Slimsport rack 40" lightbar wind faring
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
2666mm (105“) L x 1383mm (54.4“) W x 196mm (7.7“) H
Approximate Installed Weight: 45.45kg (100.2lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 270mm (11")
Length: 1700mm (67")
Height: 325mm (13")
Shipping Weight:
Weight: 47kg (103lbs)
- Language: EN
- Filename: F_KSTS001.pdf
- Filesize: 8.54 M
- Language: EN
- Filename: F_RRAC286.pdf
- Filesize: 4.99 M
*A PDF viewer is required to view the fitting instructions.
